Today I'm going to show you how I changed a baby formula container into a cute container for supplies!
I've been saving baby formula containers for MONTHS! I kept thinking to myself, "These are great containers! I'm going to cover them and make them cute!" It's taken about 8 months (Yikes!) but I'm finally following through on my idea.
So I started with my supplies. I used clean baby formula containers (Target brand), chevron contact paper (from amazon), scissors, measuring tape, and a plastic scraper (Bed Bath & Beyond I think).
The hubs helped with removing the labels (both layers) from the rectangular and cylinder formula containers.
These came off easily for us so we didn't need to bust out the goo-be-gone thankfully!
Then I measured around the container and the height.
If you're using the Target brand container the measurements I used were 21 in.around & 5 in. tall for the rectangular one. For the big cylinder it was 17 in. around & 5 in. tall. This allowed for a little bit of overlap and some space on the edges.
*Note you can use any formula containers I just happen to have the Up & Up Target ones.*
I was so happy the contact paper had measurement lines on the back! Yessss!
Now you want to do your best to stick down the first edge of the contact paper on your container in a straight line. Then you slowly (seriously like a turtle-haha) unroll the backing to reveal the adhesive and press it evenly onto the container.
While I was ever so slowly placing the contact paper on the container I was smoothing it out with my handy dandy scraper. This thing was seriously a life-saver! The idea of using contact paper usually sends me into horrible flashbacks of grade school attempting to cover my workbooks & it sticking to everything except the book. Am I right!? But the plastic scraper really made this step easier. The cylinder container was easier on this step and I was able to just use my thumbs to smooth out the bumps as I slowly removed the backing.
Sometimes it didn't go as well...
But overall it was a simple little craft. I think these will look great on my classroom shelves. You could also use them for the kids' small toys, or a travel container for some little legos. I plan on putting a cute label on them so the kids can help themselves to supplies.
I'm sure once my little guy gets a bit older I'll be using them for little cars and action figures.
Happy crafting & thanks for stopping by!
I've been saving baby formula containers for MONTHS! I kept thinking to myself, "These are great containers! I'm going to cover them and make them cute!" It's taken about 8 months (Yikes!) but I'm finally following through on my idea.
So I started with my supplies. I used clean baby formula containers (Target brand), chevron contact paper (from amazon), scissors, measuring tape, and a plastic scraper (Bed Bath & Beyond I think).
The hubs helped with removing the labels (both layers) from the rectangular and cylinder formula containers.
These came off easily for us so we didn't need to bust out the goo-be-gone thankfully!
Then I measured around the container and the height.
If you're using the Target brand container the measurements I used were 21 in.around & 5 in. tall for the rectangular one. For the big cylinder it was 17 in. around & 5 in. tall. This allowed for a little bit of overlap and some space on the edges.
*Note you can use any formula containers I just happen to have the Up & Up Target ones.*
I was so happy the contact paper had measurement lines on the back! Yessss!
Now you want to do your best to stick down the first edge of the contact paper on your container in a straight line. Then you slowly (seriously like a turtle-haha) unroll the backing to reveal the adhesive and press it evenly onto the container.
While I was ever so slowly placing the contact paper on the container I was smoothing it out with my handy dandy scraper. This thing was seriously a life-saver! The idea of using contact paper usually sends me into horrible flashbacks of grade school attempting to cover my workbooks & it sticking to everything except the book. Am I right!? But the plastic scraper really made this step easier. The cylinder container was easier on this step and I was able to just use my thumbs to smooth out the bumps as I slowly removed the backing.
Sometimes it didn't go as well...
But overall it was a simple little craft. I think these will look great on my classroom shelves. You could also use them for the kids' small toys, or a travel container for some little legos. I plan on putting a cute label on them so the kids can help themselves to supplies.
I'm sure once my little guy gets a bit older I'll be using them for little cars and action figures.
Happy crafting & thanks for stopping by!
